OpenWRT9331网口及LED灯显示错误修改OpenWRT固件LED灯修改方法
以编译tl-wr741n-v4固件为例
OpenWRT/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr741nd-v4.c，将代码
ath79_setup_ar933x_phy4_switch(true, true); 改为ath79_setup_ar933x_phy4_switch(false, false);
#define TL_WR741NDV4_GPIO_LED_WAN 13; 改为 #define TL_WR741NDV4_GPIO_LED_WAN 17
#define TL_WR741NDV4_GPIO_LED_LAN4 17; 改为#define TL_WR741NDV4_GPIO_LED_LAN4 13
static struct gpio_led tl_wr741ndv4_leds_gpio[] __initdata = {
{
.name = "tp-link:green:lan1",
.gpio = TL_WR741NDV4_GPIO_LED_LAN1,
.active_low = 0,
}, {
.name = "tp-link:green:lan2",
.gpio = TL_WR741NDV4_GPIO_LED_LAN2,
.active_low = 0,
}, {
.name = "tp-link:green:lan3",
.gpio = TL_WR741NDV4_GPIO_LED_LAN3,
.active_low = 0,
}, {
.name = "tp-link:green:lan4",
.gpio = TL_WR741NDV4_GPIO_LED_LAN4,
.active_low = 0,
}, {
.name = "tp-link:green:qss",
.gpio = TL_WR741NDV4_GPIO_LED_QSS,
.active_low = 0,
}, {
.name = "tp-link:green:system",
.gpio = TL_WR741NDV4_GPIO_LED_SYSTEM,
.active_low = 1,
}, {
.name = "tp-link:green:wan",
.gpio = TL_WR741NDV4_GPIO_LED_WAN,
.active_low = 1,
}, {
.name = "tp-link:green:wlan",
.gpio = TL_WR741NDV4_GPIO_LED_WLAN,
.active_low = 0,
}, {
.name = "tp-link:green:3g",
.gpio = TL_MR3220V2_GPIO_LED_3G,
.active_low = 0,
},
};
注：红色的字都是需要更改的。
点击链接加入群聊三群：751529538
点击链接加入群聊二群：376877156
点击链接加入群聊【路由器交流群：622891808已满】
本站附件分享，如果附件失效，可以去找找看
饿了么红包
